Pneumatic Punching Machine in Mahesana
Mahesana’s industrial landscape — from the ceramic tile clusters of Unjha to the agricultural implement makers in Visnagar and the dairy equipment fabricators along the Mehsana–Palanpur highway — relies on quick, clean hole punching for brackets, flanges, enclosure panels and structural connections. When a shop needs 500 identical flange holes by lunch, cycle speed and tooling simplicity matter more than maximum tonnage.
APH Machine’s Pneumatic Punching Machine delivers 30–60 strokes per minute with a clean, burr-free hole in aluminium, mild steel and sheet metal up to 6 mm. The direct-acting pneumatic cylinder gives instant force without hydraulic oil, heat or leak risk. Quick-change punch/die holders swap in under 30 seconds, and the foot-pedal cycle keeps both hands free for part positioning.
Fabrication units in the Mahesana GIDC, Kadi, Kalol and the Unjha ceramic corridor use it to replace slow manual punching, eliminate outsourced hole-making and maintain consistent hole quality across shift changes. The compact C-frame fits beside a press brake or shear, and the low air consumption (200 L/min at 6 bar) runs on a standard shop compressor.
Built in Vadodara — just 2.5 hours from Mahesana — the machine ships with tooling optimised for your hole patterns, on-site commissioning by engineers who speak Gujarati and understand North Gujarat’s production rhythms, and a service network covering Patan, Sidhpur and the Kutch border.

6 mm Steel
Max thickness
60 spm
Cycle rate
30 sec
Tool change
6 bar Air
Standard shop supply
Key Features
Built for North Gujarat’s High-Speed Fabrication
From the bracket holes on a dairy chiller in Unjha to the flange patterns on a ceramic kiln frame in Visnagar, every punch cycle is fast, clean and repeatable.
Clean Pneumatic Power
Foot-Pedal Operation
Quick-Change Tooling
Adjustable Stroke & Pressure
Low Maintenance Air System
Versatile Throat & Table
Applications
Fast Holes for North Gujarat’s Fabrication Lines
From the mounting holes on a dairy pipeline flange in Unjha to the bracket patterns on a textile machine frame in Kadi, the pneumatic puncher keeps pace with daily targets.
Industries We Serve
Trusted by North Gujarat’s Sheet Metal Shops
From dairy equipment builders in Unjha to agricultural machinery fabricators in Visnagar and panel builders along the Mehsana highway, the pneumatic puncher fits the shop floor and the budget.
Dairy & Food Equipment
Agricultural Machinery
Panel & Enclosure Builders
General Fabrication
Service Coverage
Across Mahesana District & North Gujarat
Our service team covers the Mahesana–Unjha–Visnagar industrial triangle, the Kadi–Kalol corridor and the Patan–Sidhpur belt for installations, tooling support and preventive maintenance.
- Mahesana GIDC
- Unjha
- Visnagar
- Kadi
- Kalol (North)
- Patan
- Sidhpur
- Harij
- Radhanpur
- Palanpur
- Deesa
How It Works
From Hole Pattern to First Punched Part
A clear path for Mahesana’s production supervisors.
Application Review
Cylinder & Tooling Select
Factory Trial & Dispatch
Commission & Train
FAQs
Common Questions from Mahesana Buyers
Up to 6 mm in mild steel, 8 mm in aluminium and 4 mm in stainless steel. Thicker materials require our hydraulic punching range. We select cylinder bore and pressure based on your material mix.
30–60 strokes/minute depending on stroke length and air pressure. Short-stroke, high-speed mode reaches 80+ cycles/min for thin sheet metal. Foot-pedal or two-hand safety start.
Standard: single punch/die set with quick-change (under 30 seconds). Optional: 4-station rotary turret indexes pneumatically for up to 4 hole sizes. CNC turret not available on pneumatic range — see hydraulic for that.
Clean, dry compressed air at 6–7 bar (90–100 psi), minimum 200 L/min. We supply an FRL unit (filter-regulator-lubricator) and recommend a dedicated 1 HP compressor for consistent cycles.
Yes. Oblong and rectangular punches available. For slots, a nibbling sequence with round punch produces straight-sided slots. Louvres require shaped tooling — we design custom punch/die sets for your pattern.
Yes. Our engineer installs, connects air supply, aligns tooling, sets stroke and pressure for your materials and trains operators at your Mahesana, Unjha or Visnagar facility. Commissioning takes 2–3 hours.
Daily: drain FRL bowl, check oil mist. Weekly: inspect hoses, verify pressure gauge, lubricate guide pins. Monthly: cylinder seal check, valve cleaning. Annual: full strip-down, seal kit replacement. We supply maintenance kits.
Need Fast Punching for Your Mahesana Shop Floor?
end us your hole patterns, material specs and daily volumes. We’ll size the right pneumatic puncher with tooling and cycle-time estimates.
Explore More
Our Machines Across India
- Aluminium Formwork Punching Machine in Ahmedabad
- Aluminium Formwork Slotting Machine in Rajkot
- Aluminium Formwork Punching Machine in Jaipur
- CNC Aluminium Profile Bending Machine in Chennai
- CNC Double Head Cutting Machine in Surat
- CNC Single Head Cutting Machine in Hyderabad
- Double Head Cutting Machine in Delhi
- Down Stroke Cutting Machine in Mumbai



