Fast-Cycle Punching · Mahesana, Gujarat

Pneumatic Punching Machine in Mahesana

Mahesana’s industrial landscape — from the ceramic tile clusters of Unjha to the agricultural implement makers in Visnagar and the dairy equipment fabricators along the Mehsana–Palanpur highway — relies on quick, clean hole punching for brackets, flanges, enclosure panels and structural connections. When a shop needs 500 identical flange holes by lunch, cycle speed and tooling simplicity matter more than maximum tonnage.

APH Machine’s Pneumatic Punching Machine delivers 30–60 strokes per minute with a clean, burr-free hole in aluminium, mild steel and sheet metal up to 6 mm. The direct-acting pneumatic cylinder gives instant force without hydraulic oil, heat or leak risk. Quick-change punch/die holders swap in under 30 seconds, and the foot-pedal cycle keeps both hands free for part positioning.

Fabrication units in the Mahesana GIDC, Kadi, Kalol and the Unjha ceramic corridor use it to replace slow manual punching, eliminate outsourced hole-making and maintain consistent hole quality across shift changes. The compact C-frame fits beside a press brake or shear, and the low air consumption (200 L/min at 6 bar) runs on a standard shop compressor.

Built in Vadodara — just 2.5 hours from Mahesana — the machine ships with tooling optimised for your hole patterns, on-site commissioning by engineers who speak Gujarati and understand North Gujarat’s production rhythms, and a service network covering Patan, Sidhpur and the Kutch border.

APH Machine pneumatic punching machine supplied in Mahesana

6 mm Steel

Max thickness

60 spm

Cycle rate

30 sec

Tool change

6 bar Air

Standard shop supply

Key Features

Built for North Gujarat’s High-Speed Fabrication

From the bracket holes on a dairy chiller in Unjha to the flange patterns on a ceramic kiln frame in Visnagar, every punch cycle is fast, clean and repeatable.

Clean Pneumatic Power

No hydraulic oil, no heat buildup, no leak risk. Direct-acting cylinder delivers full force instantly — ideal for clean-room and food-grade fabrication.

Foot-Pedal Operation

Two-hand safety or single foot-pedal start. Both hands free for part loading — critical for small brackets and high-mix, low-volume runs.

Quick-Change Tooling

Standardised punch/die holders with dowel location. Swap hole sizes in under 30 seconds. Optional 4-station rotary turret for multi-size jobs.

Adjustable Stroke & Pressure

Stroke: 10–50 mm via spacer rings. Pressure: 3–7 bar regulator. Optimise cycle time and tool life for each material thickness.

Low Maintenance Air System

FRL unit included. Self-lubricating cylinder seals. No oil changes, no filter cartridges — just clean air and occasional valve check.

Versatile Throat & Table

Throat depths: 150, 250, 350 mm. Slotted table with T-slots for quick fixturing. Custom throat extensions for wide panels.

Technical Specifications
Machine Type Industrial Profile Cutting Machine
Blade Diameter 400 / 450 / 500 / 550 mm (carbide-tipped)
Max Section (W × H) 450 × 300 mm (large model)
Mitre Range 0–45° L/R (60° L optional)
Blade Speed 15–120 m/min (VFD controlled)
Feed System Hydro-static / Servo (CNC)
Length Tolerance ±0.1 mm (single), ±0.2 mm (bundle)
Bundle Capacity Up to 15 profiles (section dependent)
Coolant Flood + mist extraction
Power Supply 415 V, 3 Phase, 50 Hz
Control Semi-auto / CNC touchscreen
* Specifications vary by model. Custom capacities, automation levels and blade sizes available.

Applications

Fast Holes for North Gujarat’s Fabrication Lines

From the mounting holes on a dairy pipeline flange in Unjha to the bracket patterns on a textile machine frame in Kadi, the pneumatic puncher keeps pace with daily targets.

Flange bolt holes — pipe, valve and equipment flanges up to 6 mm.

Bracket & gusset holes — high-volume repetitive patterns.

Enclosure panel cutouts — cable glands, switches, displays.

Sheet metal slots — nibbled slots for adjustment, ventilation.

Louvre & ventilation punching — custom shaped tooling.

Nameplate & tag holes — quick change for varying sizes.

Industries We Serve

Trusted by North Gujarat’s Sheet Metal Shops

From dairy equipment builders in Unjha to agricultural machinery fabricators in Visnagar and panel builders along the Mehsana highway, the pneumatic puncher fits the shop floor and the budget.

Dairy & Food Equipment

Agricultural Machinery

Panel & Enclosure Builders

General Fabrication

Service Coverage

Across Mahesana District & North Gujarat

Our service team covers the Mahesana–Unjha–Visnagar industrial triangle, the Kadi–Kalol corridor and the Patan–Sidhpur belt for installations, tooling support and preventive maintenance.

  • Mahesana GIDC
  • Unjha
  • Visnagar
  • Kadi
  • Kalol (North)
  • Patan
  • Sidhpur
  • Harij
  • Radhanpur
  • Palanpur
  • Deesa

How It Works

From Hole Pattern to First Punched Part

A clear path for Mahesana’s production supervisors.

Application Review

Share your material specs, thickness range, hole sizes, patterns and daily volumes.

Cylinder & Tooling Select

We choose cylinder bore, stroke, throat depth and design the punch/die sets.

Factory Trial & Dispatch

Machine punches your actual parts at Vadodara — hole quality and cycle time verified.

Commission & Train

Engineer installs, connects air, aligns tooling, sets pressure and trains operators.

FAQs

Common Questions from Mahesana Buyers

Up to 6 mm in mild steel, 8 mm in aluminium and 4 mm in stainless steel. Thicker materials require our hydraulic punching range. We select cylinder bore and pressure based on your material mix.

30–60 strokes/minute depending on stroke length and air pressure. Short-stroke, high-speed mode reaches 80+ cycles/min for thin sheet metal. Foot-pedal or two-hand safety start.

Standard: single punch/die set with quick-change (under 30 seconds). Optional: 4-station rotary turret indexes pneumatically for up to 4 hole sizes. CNC turret not available on pneumatic range — see hydraulic for that.

Clean, dry compressed air at 6–7 bar (90–100 psi), minimum 200 L/min. We supply an FRL unit (filter-regulator-lubricator) and recommend a dedicated 1 HP compressor for consistent cycles.

Yes. Oblong and rectangular punches available. For slots, a nibbling sequence with round punch produces straight-sided slots. Louvres require shaped tooling — we design custom punch/die sets for your pattern.

Yes. Our engineer installs, connects air supply, aligns tooling, sets stroke and pressure for your materials and trains operators at your Mahesana, Unjha or Visnagar facility. Commissioning takes 2–3 hours.

Daily: drain FRL bowl, check oil mist. Weekly: inspect hoses, verify pressure gauge, lubricate guide pins. Monthly: cylinder seal check, valve cleaning. Annual: full strip-down, seal kit replacement. We supply maintenance kits.

Need Fast Punching for Your Mahesana Shop Floor?

end us your hole patterns, material specs and daily volumes. We’ll size the right pneumatic puncher with tooling and cycle-time estimates.