High-Throughput Cutting · Delhi NCR

Double Head Cutting Machine in Delhi

Delhi NCR’s window and door fabrication ecosystem — stretching from the industrial belts of Wazirpur, Mayapuri and Naraina to the sprawling factories of Gurugram, Faridabad, Noida and Ghaziabad — operates on razor-thin lead times. A single-head saw that requires flipping the profile for the mitre cut simply cannot meet the throughput demanded by large residential township and commercial tower projects.

APH Machine’s Double Head Cutting Machine places two independent saw heads on a rigid, vibration-damped beam. While the left head executes a clean 90° cross-cut, the right head simultaneously mitres the mating end at 45° (or any preset angle), delivering a complete, assembly-ready frame set in a single loading action. No profile flipping, no second cycle, no cumulative tolerance stack-up.

Each head features independent angle adjustment with digital readout and hardened positive stops at 45° and 90°, fine-tuned via worm gear for repeatable precision. Heavy pneumatic clamps — horizontal and vertical — lock thin-wall sliding sections and heavy curtain-wall mullions with equal authority, eliminating chatter marks on visible surfaces.

Manufactured in Vadodara and shipped by dedicated road transport, the machine reaches Delhi NCR in under 18 hours. Our commissioning engineers install, calibrate length stops, validate first cuts on your actual profiles and train your operators — all before the machine enters production.

Double head cutting machine twin saw heads cutting aluminium window profiles in Delhi NCR

2× Throughput

Simultaneous twin-head cut

Digital Angle

Readout with positive stops

~18 hrs

Vadodara to Delhi NCR

Multi-Shift

Built for 24/7 NCR factories

Key Features

Engineered for NCR’s Non-Stop Fabrication Lines

From the high-volume system houses in Bahadurgarh to the project-focused units in Okhla, every component is chosen to sustain output without sacrificing the mitre quality that prevents site callbacks.

Twin Independent Saw Heads

Two 5 HP motors drive Ø500 mm TCT blades on separate spindles. Each head swivels independently with its own angle scale and positive stops.

Heavy Pneumatic Clamping

Four-position clamps (two horizontal, two vertical) with pressure regulator secure profiles from 20 mm to 180 mm height without distortion.

Digital Angle Readout

Each head displays live angle to 0.1° resolution. Hardened positive stops at 45°/90° click into place for instant, repeatable mitre setup.

Dual Chip Extraction

Dedicated extraction hoods at each blade merge into a single high-CFM port, keeping both cutting zones chip-free and blades cool.

Adjustable Length Stops

Flip-over stops on both infeed and outfeed sides support batch cutting of identical lengths. Quick-release levers for fast changeover.

Quick-Change Blade System

Tool-less blade clamp reduces swap time to under two minutes. Pre-set hub height maintains centreline — no re-zeroing after change.

Technical Specifications
Machine Type Double Head Cutting Machine
Saw Blades 2 × Ø500 mm TCT
Cutting Angles 45° – 135° (each head independent)
Positive Stops 45°, 90° (hardened, worm-gear fine adj.)
Max Profile Size 180 mm (H) × 130 mm (W)
Length Range 300 – 6000 mm (flip stops)
Motor Power 2 × 3.7 kW (5 HP each)
Blade Speed 2800 RPM
Clamping Pneumatic, 4-position
Power Supply 415 V, 3 Phase, 50 Hz
Materials Aluminium, UPVC
* CNC angle positioning and extended capacity models available on request.

Applications

Frame Kits Driving NCR’s Construction Boom

From the affordable housing corridors of Bhiwadi and Dharuhera to the premium towers of Golf Course Road and Noida Expressway, Delhi NCR fabricators trust twin-head precision for every frame leaving their floor.

Sliding & casement window frames — complete kits in one cycle.

Main door & balcony door systems with consistent mitre quality.

Curtain-wall mullion & transom sets for commercial high-rises.

UPVC window & door profiles with rapid blade changeover.

Office partition & glazing frames for fit-out contractors.

Industrial shed & warehouse glazing for NCR logistics parks.

Industries We Serve

The Backbone of NCR’s Window & Door Industry

From family-run units in Kirti Nagar to export-oriented factories in IMT Manesar, our double-head saws power the region’s aluminium and UPVC fabrication capacity.

Window & Door Manufacturers

Façade & Glazing Contractors

UPVC System Fabricators

Industrial & Commercial Fabricators

Service Coverage

Serving Every Industrial Pocket of Delhi NCR

Our service team navigates the NCR’s industrial geography daily — from the dense inner-city estates to the new manufacturing corridors along the expressways.

  • Wazirpur Industrial Area
  • Mayapuri
  • Naraina
  • Okhla Phase I & II
  • Mohan Cooperative
  • Gurugram (Udyog Vihar, IMT Manesar)
  • Faridabad (NIT, Sector 24, 59)
  • Noida (Phase II, Sector 63, 80)
  • Greater Noida (Surajpur, Ecotech)
  • Ghaziabad (Sahibabad, Loni)
  • Bahadurgarh
  • Bhiwadi
  • Dharuhera

How It Works

From Enquiry to First Frame Kit in NCR

A transparent buying journey designed around the urgent timelines of Delhi NCR projects.

Profile & Volume Review

Share your profile range, daily frame kit target and aluminium/UPVC split by call or WhatsApp.

Configuration & Quote

Configuration & Quote

Build, Test & Dispatch

Machine assembled at Vadodara, trial-cut on your profiles, then road-transported to your NCR site.

Install, Calibrate & Train

Our engineer levels, zeros stops, validates first cuts and trains your team on operation & maintenance.

FAQs

Questions from NCR Fabrication Managers

Yes. We dispatch from Vadodara to Delhi, Gurugram, Noida, Faridabad, Ghaziabad and Greater Noida by road. Installation, blade setup, length-stop calibration and operator training are included.

Yes. With a quick blade change (aluminium TCT blade or UPVC-specific blade), the machine cuts both materials. Each head has independent blade guards and extraction ports for clean switching.

Standard capacity is 180 mm height × 130 mm width, covering most residential and commercial window, door and curtain-wall sections. Larger structural models are available on request.

Each head swivels manually with a digital angle readout and positive stops at 45° and 90°. Fine adjustment is via a worm gear for repeatable accuracy. Optional CNC angle positioning is available.

Yes. Twin-head simultaneous cutting, heavy-duty pneumatic clamping and integrated chip extraction make it ideal for the multi-shift window and door factories across Delhi NCR.

Our service engineers cover Delhi, Gurugram, Faridabad, Noida and Ghaziabad. Blades, belts, pneumatic seals and electrical spares are stocked at Vadodara for next-day dispatch. Annual maintenance contracts are available.

Yes. Visit our Vadodara plant for a live demo on your profiles, or we can arrange a video demonstration over WhatsApp showing the twin-head cycle on your section types.

Ready to Double Your Frame Output in Delhi NCR?

Discuss your profile range and volume targets with our application engineers. Get a detailed quote with cycle-time estimates and ROI calculation.